Cara Konfigurasi CLI Pada Cisco

 Hai Guys, balik Lagi nih Fio mau bagi bagi Ilmu Cara Konfigurasi CLI pada Router Cisco :)

Semoga Dapat dimengerti dan Di Pahami :)

dan Semoga Bermanfaat !!

Router>en

Router>enable

Router#con

Router#conf

Router#configure ter

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#hos

Router(config)#hostname router_shintia

router_shintia(config)#ena

router_shintia(config)#enable pas

router_shintia(config)#enable password 123456789

router_shintia(config)#in

router_shintia(config)#interface fa

router_shintia(config)#interface fastEthernet 0/1

router_shintia(config-if)#ap add

router_shintia(config-if)#ip add

router_shintia(config-if)#ip address 192.168.10.100 255.255.255.0

router_shintia(config-if)#no sh

router_shintia(config-if)#no shutdown

router_shintia(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

router_shintia(config-if)#exit

router_shintia(config)#exit

router_shintia#

%SYS-5-CONFIG_I: Configured from console by console

router_shintia#wir

router_shintia#wr

router_shintia#write mem

router_shintia#write memory

Building configuration...

[OK]

router_shintia#

Ini Bagan Cisco Menggunakan Router,Switch dan aku pakai 20 PC. hehehe

nah, untuk kabel penghubung aku pakai kabel Straight.

 

Kalau ini konfigurasi pada CLI Router

TERIMAKASIH :)